Easy to install
The systems are pre-mounted onto a backboard and can be mounted onto any wall surface in the pump room. Since the systems use bypass flow and are not in-Line, the can be plumbed in an existing circulation system by tapping into the existing line.

Easy to use
These self-cleaning systems offer the simplest operation available. Operators can use a dial to increase or decrease chlorine production. Alternatively, comine with a controller for Total Water Management Programs.

Wide range of outputs
Ten system models are availagle that produce from 3.5 lbs. to 25 lbs. of equivalent chlorine per day, in a single cell--the largest available in the market.

Reliable performance
All components used in the manufacture of the systems are industrial equipment and designed for 24/7 operation. If necessary, the system could operate at maximum output contiuously.

ORP inputs
All systems have a separate ORP input which allows a regular controller to activate the chlorine generators. This allows pools to keep existing controllers to maintain ORP and pH levels.

Bather friendly
Systems operate with 0.5% Salinity in the water. This salinity level is slightly less than human tears and gives the water a "mineral spa" feel. In comparison, seawater has a salinity of approximately 3.5%

Low Operating Costs
Systems operate using the salinity in the water to produce hypochlorous acid. Because salt is continuously recycled during this process, the only makeup required is when water is lost due to backwashing or splash out.