Easy to install
The ChlorKing "M" model systems are mounted onto any wall surface in the pump room, and plumbed into an existing circulation system, without cutting into existing pipes. The ChlorKing "M" model systems use bypass flow and are not in-line.

Easy to use
ChlorKing offers the simplest operation available, using the KIS (keep it simple) process. A dial is mounted on the system, similar to a light dimmer at home, and a simple turn of the dial increases, or decreases chlorine production. The "M" model is equipped with two additional visual indicators, a voltmeter, and a low salt LED mounted on the front panel. These additional indicators make the operation of the ChlorKing system even easier.

Wide range of outputs
Ten system models are available that produce from 3.5 lbs. to 25 lbs. of equivalent chlorine per day, in a single cell--the largest available in the market.

Reliable performance
All components used in the manufacture of the ChlorKing systems are industrial equipment and designed for 24/7 operation, allowing the ChlorKing systems to operate at maximum output continuously.

Models available
27167BPG - 1.25 lb / day
27166BPG - 2.5 lb / day

ORP inputs
All ChlorKing "M" systems have a separate ORP input which allows a regular controller to activate the ChlorKing system. This allows pools to keep their existing controllers to maintain ORP and pH levels.

Bather friendly
ChlorKing systems operate with 0.5% Salinity in the water. This salinity level is slightly less than human tears and gives the water a "mineral spa" feel.

Low Operating Costs
ChlorKing systems operate using the salinity in the water to produce hypochlorous acid, which is what is measured as free chlorine on test kits. Because salt is consumed in this process, the only makeup required is when water is lost due to backwashing or rainfall.